| Task: | Program |
|---|---|
| Structure: | Combination |
| Mathematical Model: | Linear |
Suppliers with verified business licenses
Thanks to their high degree of reliability, SITOP power supplies have established themselves around the world and can cope with even critical network conditions. Our complete range of power packs supplies regulated 24 volts and other output voltages. The unique range of DC UPS and add-on modules extends the power supply system: 24 V supplies are thus protected against interference from the grid and on the direct voltage side.
The single-phase and three-phase SITOP smart (SITOP PSU100S, PSU300S) are the universal and powerful standard power supplies for machine and plant construction. Despite their compact design, they offer an excellent overload response: Thanks to a power boost of 150%, loads with high power consumption can be connected without any problems and the permanent overload capability of the 24 V power supplies from 120% to 45 °C offers power reserves in case of expansions. The high degree of efficiency results in low energy consumption and minimal heat generation inside the control cabinet.
| General information | |
| ID | 6EP1322-2BA00 |
| Input | |
| type of the power supply network | 1-phase AC |
| supply voltage at AC initial value |
Automatic range selection |
| supply voltage 1 at AC rated value 2 at AC rated value |
120 V 230 V |
| input voltage 1 at AC 2 at AC |
85 ... 132 V 170 ... 264 V |
| design of input wide range input | No |
| overvoltage overload capability | 2.3 × Vin rated, 1.3 ms |
| operating condition of the mains buffering | at Vin = 93/187 V |
| buffering time for rated value of the output current in the event of power failure minimum | 20 ms |
| operating condition of the mains buffering | at Vin = 93/187 V |
| line frequency 1 rated value 2 rated value |
50 Hz 60 Hz |
| line frequency | 47 ... 63 Hz |
| input current at rated input voltage 120 V at rated input voltage 230 V |
1.73 A 0.99 A |
| current limitation of inrush current at 25 °C maximum | 45 A |
| fuse protection type in the feeder |
T 3,15 A/250 V (not accessible) Recommended miniature circuit breaker: from 6 A characteristic C |
| Output | |
| voltage curve at output | Controlled, isolated DC voltage |
| output voltage at DC rated value | 12 V |
| output voltage at output 1 at DC rated value |
12 V |
| relative overall tolerance of the voltage | 3 % |
| relative control precision of the output voltage on slow fluctuation of input voltage on slow fluctuation of ohm loading |
0.1 % 1% |
| Static load balancing, approx. | 0.2 % |
| residual ripple maximum typical |
150 mV 20 mV |
| voltage peak maximum typical |
240 mV 100 mV |
| adjustable output voltage | 11.5 ... 15.5 V |
| product function output voltage adjustable | Yes |
| Status display | Green LED for 12 V OK |
| type of signal at output | Relay contact (NO contact, rating 60 V DC/ 0.3 A) for 12 V OK |
| behavior of the output voltage when switching on | Overshoot of Vout < 3 % |
| response delay maximum | 0.3 s |
| voltage increase time of the output voltage typical |
10ms |
| output current rated value rated range |
7 A 0 ... 7 A; +50 ... +70 °C: Derating 0.75%/K |
| product feature | 84 W |
| short-term overload current on short-circuiting during the start-up typica at short-circuit during operation typica |
25 A 25 A |
| duration of overloading capability for excess current on short-circuiting during the start-up at short-circuit during operation |
800 ms 800 ms |
| constant overload current on short-circuiting during the start-up typical |
23 A |
| product feature bridging of equipment |
Yes |
| number of parallel-switched equipment resources for increasing the power | 2 |
| Dimensions | |
| width of the enclosure | 50 mm |
| height of the enclosure | 125 mm |
| depth of the enclosure | 120 mm |
| Weights | |
| net weight | 0.5 kg |
| Advanced power supplies | |
| SITOP PSU8600 | |
| Basic units 24 V DC (PSU8600) | |
| 6EP3336-8MB00-2CY0 | 6EP3436-8MB00-2CY0 |
| 6EP3436-8SB00-2AY0 | 6EP3437-8MB00-2CY0 |
| 6EP3437-8MB10-2CY0 | 6EP3437-8SB00-2AY0 |
| Modular system, expansion of outputs (CNX8600) | |
| 6EP4436-8XB00-0CY0 | 6EP4436-8XB00-0DY0 |
| 6EP4437-8XB00-0CY0 | |
| 6EP4293-8HB00-0XY0Modular system, buffer modules for brief power failure (BUF8600) | |
| 6EP4293-8HB00-0XY0 | 6EP4295-8HB00-0XY0 |
| 6EP4297-8HB00-0XY0 | 6EP4297-8HB10-0XY0 |
| SITOP PSU8400 | |
| 6EP3437-8SB00-4AY0 | |
| SITOP PSU8200 | |
| 1-phase, 24 V DC | |
| 6EP1336-3BA10 | 6EP3333-8SB00-0AY0 |
| 6EP3334-8SB00-0AY0 | 6EP3337-8SB00-0AY0 |
| 6EP3337-8SC00-0AY0 | |
| 1- and 2-phase, 24 V DC | |
| 6EP1333-3BA10 | 6EP1333-3BA10-8AC0 |
| 6EP1334-3BA10 | 6EP1334-3BA10-8AB0 |
| 3-phase, 24 V DC | |
| 6EP3436-8SB00-0AY0 | 6EP3437-8SB00-0AY0 |
| 3-phase, 36 V DC | |
| 6EP3446-8SB10-0AY0 | |
| 3-phase, 48 V DC | |
| 6EP3446-8SB00-0AY0 | 6EP3447-8SB00-0AY0 |
| Standard power supplies | |
| SITOP PSU6200 | |
| 1-phase, 12 V DC | |
| 6EP3321-7SB00-0AX0 | 6EP3323-7SB00-0AX0 |
| 6EP3324-7SB00-3AX0 | |
| 1-phase, 24 V DC | |
| 6EP3331-7SB00-0AX0 | 6EP3332-7SB00-0AX0 |
| 6EP3333-7LB00-0AX0 | 6EP3333-7SB00-0AX0 |
| 6EP3333-7SC00-0AX0 | 6EP3334-7SB00-3AX0 |
| 6EP3334-7SC00-3AX0 | 6EP3336-7SB00-3AX0 |
| 6EP3336-7SC00-3AX0 | |
| 1-phase, 48 V DC | |
| 6EP3344-7SB00-3AX0 | 6EP3346-7SB00-3AX0 |
| 3-phase, 24 V DC | |
| 6EP3433-7SB00-0AX0 | 6EP3433-7SC00-0AX0 |
| 6EP3434-7SB00-3AX0 | 6EP3434-7SC00-3AX0 |
| 6EP3436-7SB00-3AX0 | 6EP3436-7SC00-3AX0 |
| 6EP3437-7SB00-3AX0 | 6EP3437-7SC00-3AX0 |
| 3-phase, 48 V DC | |
| 6EP3444-7SB00-3AX0 | 6EP3446-7SB00-3AX0 |
| 6EP3447-7SB00-3AX0 | |
| SITOP smart | |
| 1-phase, 12 V DC | |
| 6EP1322-2BA00 | 6EP1323-2BA00 |
| 1-phase, 24 V DC | |
| 6EP1332-2BA20 | 6EP1333-2BA20 |
| 6EP1334-2BA20 | 6EP1336-2BA10 |
| 3-phase, 24 V DC | |
| 6EP1433-2BA20 | 6EP1434-2BA20 |
| 6EP1436-2BA10 | 6EP1437-2BA20 |
| Basic power supplies | |
| SITOP lite | |
| 1-phase, 24 V DC | |
| 6EP1332-1LB00 | 6EP1333-1LB00 |
| 6EP1334-1LB00 | 6EP1336-1LB00 |
| LOGO!Power | |
| 1-phase, 5 V DC | |
| 6EP3310-6SB00-0AY0 | 6EP3311-6SB00-0AY0 |
| 1-phase, 12 V DC | |
| 6EP3320-6SB00-0AY0 | 6EP3321-6SB00-0AY0 |
| 6EP3322-6SB00-0AY0 | |
| 1-phase, 15 V DC | |
| 6EP3321-6SB10-0AY0 | 6EP3322-6SB10-0AY0 |
| 1-phase, 24 V DC | |
| 6EP3330-6SB00-0AY0 | 6EP3331-6SB00-0AY0 |
| 6EP3332-6SB00-0AY0 | 6EP3333-6SB00-0AY0 |
| 6EP3333-6SC00-0AY0 | |
| SITOP compact | |
| 1-phase, 12 V DC | |
| 6EP1321-5BA00 | 6EP1322-5BA10 |
| 1-phase, 24 V DC | |
| 6EP1331-5BA00 | 6EP1331-5BA10 |
| 6EP1332-5BA00 | 6EP1332-5BA10 |
| 6EP1332-5BA20 | |
Shanghai Zhongcheng Fengyuan Industrial Technology Co., Ltd. is an engineering company with a global network of engineering centers, providing high-performance and cost-effective services to global customers. We have established partnerships with most world-renowned brands and can provide components and equipment for the oil and gas, industrial, chemical, and energy industries.
The company's industrial control brand covers major global manufacturers, including but not limited to: Allen Bradley, IFM, Beckhoff, Yaskawa, Pepperl+Fuchs, Sick, etc. The products include PLC/DCS modules, touch screens, drive inverters, industrial power supplies, I/O systems, industrial communication, low-voltage control equipment, low-voltage distribution equipment, medium voltage spare parts, protective relays, etc. We have rich industry experience, professional services, and good protective packaging.
We cooperate with various official express delivery companies to export to various parts of the world, such as South Asia, Europe, North America, South America, the Middle East, and Africa. Reducing customer costs helps to create more benefits for each of our customers
Zhongcheng Fengyuan has won the trust of a large number of customers. Our belief is to help our customer factories achieve digitization, intelligence, automation, and create maximum benefits for our customers. Looking forward to working with you!
1. Question: How is the warranty?
Answer: All products we provide come with a 12 month warranty
2. Question: What about shipping?
Answer: They are in stock and can be shipped immediately. We can arrange shipments of DHL, FedEx, UPS, TNT, EMS at competitive prices, and of course, customers can also use their own freight forwarders.
3. Question: Why did you purchase from us?
Answer: We have a team of qualified sales personnel who are always ready to meet customer needs with high-quality products.
4. Question: Are other suppliers offering better prices than you?
Answer: Creating maximum benefits for customers is our belief. If you have a better price, please let us know. We will do our best to meet your price and provide support for you.
5: Q: What payment method do you accept?
Answer: Telegraphic transfer (bank transfer), Western Union transfer, credit card, PayPal, letter of credit, Alipay, cash, custody, etc.
){kind=link}