| Usage: | Module |
|---|---|
| Type: | Wired |
| Support Network: | Module |
Suppliers with verified business licenses
ABBS Ability™ System 800xA®
System 800xA is not only a DCS (Distributed Control System) it's also an Electrical Control System, a Safety system and a collaboration enabler with the capacity to improve engineering efficiency, operator performance and asset utilization.
S800 I/O is a comprehensive, distributed, and modular process I/O system that communicates with parent controllers over industry-standard field buses. Module Termination Units (MTUs) host S800 I/O modules and are keyed to ensure the correct module is used. Many Module Termination Units (MTUs) options are available for various S800 I/O modules to meet your project requirements.
The TU818 is a 32 channel 50 V compact module termination unit (MTU) for the S800 I/O. The MTU is a passive unit used for connection of the field wiring to the I/O modules. It also contains a part of the ModuleBus.
The MTU distributes the ModuleBus to the I/O module and to the next MTU. It also generates the correct address to the I/O module by shifting the outgoing position signals to the next MTU.
Two mechanical keys are used to configure the MTU for different types of I/O modules. This is only a mechanical configuration and it does not affect the functionality of the MTU or the I/O module. Each key has six positions, which gives a total number of 36 different configurations.
| General info | |
| Article number | 3BSE069209R1 |
| Type | Compact |
| Connection | Terminal block |
| Channels | 32 |
| Voltage | 50 V |
| Mounting | Both directions |
| Mounting detail | Horizontal 55 ºC (131 °F) Vertical 40 ºC (104 °F) |
| Use with I/O | AI810, AI815, AI835A, AI843, AI845, AI880A, DI810, DI811, DI818, DI830, DI831, DI840, DI880, DI885, DO818, DP840 |
| Process connections | 40 pole screw terminal |
| Single/redundant I/O | Single |
| Detailed data | |
| Maximum current per I/O channel | 1 A |
| Maximum current process connection | L1+ max 8A L2+ max 8A |
| Acceptable wire sizes | Solid: 0.5 - 2.5 mm² Stranded: 0.5 - 1.5 mm² |
| Dielectric test voltage | 500 V a.c. |
| Dimensions | |
| Width | 64 mm (2.52 in.) including connector, 58.5 mm (2.3 in.) edge to edge installed |
| Depth | 64 mm (2.52 in.), including terminals |
| Height | 170 mm (6.7 in.) including latch |
| Weight | 0.17 kg (0.37 lbs) |
S800 I/O Modules
S800 I/O is a comprehensive and modular process I/O system that communicates with parent controllers either direct connected using the Modulebus or over industry-standard field buses. Thanks to its broad connectivity it fits a wide range of process controllers from ABBS and others.
| Digital input modules | ||
| DI810 | 3BSE008508R1 | 16 channels, 2 groups of 8 channels, 24 V d.c., current sink. |
| DI811 | 3BSE008552R1 | 16 channels, 2 groups of 8 channels, 48 V d.c., current sink. |
| DI814 | 3BUR001454R1 | 16 channels, 2 groups of 8 channels, 24 V d.c., current source. |
| DI818 | 3BSE069052R1 | 32 channels, 2 groups of 16 channels, 24 V d.c., current sink. |
| DI820 | 3BSE008512R1 | 8 channels, separate returns, 110 V d.c., 120 V a.c. |
| DI821 | 3BSE008550R1 | 8 channels, separate returns, 220 V d.c., 230 V a.c. |
| DI825 | 3BSE036373R1 | With time tagging, 8 channels, separate returns, 125 V d.c. |
| DI828 | 3BSE069054R1 | 16 channels, separate returns, 110 V d.c., 120 V a.c / d.c. |
| DI830 | 3BSE013210R1 | With time tagging. 16 channels, 2 groups of 8 channels, 24 V d.c., current sink. Resolution: < 0.5 ms. |
| DI831 | 3BSE013212R1 | With time tagging. 16 channels, 2 groups of 8 channels, 48 V d.c., current sink. Resolution: < 0.5 ms. |
| Pulse input module | ||
| DP820 | 3BSE013228R1 | 2 channels, separate returns, 0.25 Hz - 1.5 MHz, signal voltage: 5 / 12 V d.c. |
| DP840 | 3BSE028926R1 | 8 channels, extended diagnostics, wire-fault detection, current limited sensor supply, 0.5-20 kHz, 12/24 V d.c or NAMUR, common return. |
| Digital output modules | ||
| DO810 | 3BSE008510R1 | 16 channels, 2 groups of 8 channels, 24 V d.c., max 0.5 A d.c., transistor, current source, short-circuit-proof |
| DO814 | 3BUR001455R1 | 16 channels, 2 groups of 8 channels, 24 V d.c., max 0.5 A, transistor, current sink, short-circuit-proof. |
| DO815 | 3BSE013258R1 | 8 channels, 2 groups of 4 channels, 24 V d.c., max 2 A, transistor, current source, short-circuit-proof, wire-fault detection. |
| DO818 | 3BSE069053R1 | 32 channels, 2 groups of 16 channels, 24 V, max 0.5 A d.c., transistor, current source, short-circuit-proof |
| DO820 | 3BSE008514R1 | 8 channels, separate returns, 5-250 V, max 3 A a.c./d.c., relay (N.O.). |
| DO821 | 3BSE013250R1 | 8 channels, separate returns, 5-250 V, max 3 A a.c./d.c., relay (N.C.). |
| DO828 | 3BSE069055R1 | 16 channels, separate returns, 5-250V a.c. / 5-125V d.c. max 2A a.c./d.c., relay (N.O.). |
| Analog input modules | ||
| AI810 | 3BSE008516R1 | 8 channels, single-ended, 0(4)-20 mA, 0(2)-10 V, 12 bits. |
| AI815 | 3BSE052604R1 | 8 channels with HART. 0(4)..20 mA, 0(1)..5 V, 12 bit, single ended, current limited transmitter supply. |
| AI820 | 3BSE008544R1 | Differential inputs, 4 channels, 0(1)-5 V, ±0(2)-10 V, ±0(4)-20 mA, 14 bits + sign. |
| AI825 | 3BSE036456R1 | Individually galvanically isolated channels, 4 channels, ±0(2)-10 V, ±0(4)- 20 mA, 14 bits + sign. |
| AI830A | 3BSE040662R1 | RTD inputs, 8 channels, Pt100, Ni100, Ni120, Cu10, resistor 0-400 ohms, 14 bits, 3-wire. |
| AI835A | 3BSE051306R1 | TC inputs, 8 channels, (7+ ref. junction), separate returns. TC types B, C, D, E, J, K, L, N, R, S, T, U, - 30…75 mV, 15 bits |
| Analog output modules | ||
| AO810V2 | 3BSE038415R1 | 8 channels, common return, 0(4)-20 mA, 14 bits, load: 850 ohms (short-circuit-proof). |
| AO815 | 3BSE052605R1 | 8 channels with HART. 4..20 mA, 12 bit, load: 750 ohms, common return, short-circuit-proof. |
| AO820 | 3BSE008546R1 | 4 channels, individually galvanically isolated, separate returns, measuring range: ±0(2)-10 V, ±0(4)-20 mA, resolution: 12 bits + sign, load: 500 ohms (current) / 5 kohms (voltage), short-circuit-proof. |
| Intrinsic-safety modules | ||
| DI890 | 3BSC690073R1 | 8 channels, separate returns, proximity sensors (NAMUR) or voltage-free contact., current sink, wire-fault detection |
| DO890 | 3BSC690074R1 | 4 channels, separate returns, load 150-5000 ohms, 11 V @ 40 mA, current source, wire-fault detection, short circuit-proof. |
| AI890 | 3BSC690071R1 | 8 channels, single-ended, 0(4)-20 mA, 12 bits, transmitter power supply. |
| AI893 | 3BSC690141R1 | 8 channels, TC: 7 + ref. junction, sep. returns. TC types B, C, E, J, K, L, N, R, S, T, U, -10…80 mV. RTD: Pt50-1000, Ni100-500, Cu10-100, resistor 0-4000 W, 3-wire. 15 bits + sign. |
| AI895 | 3BSC690086R1 | 8 channels, single-ended, 4-20 mA, 12 bits, transmitter power supply, HART pass-through. |
| AO890 | 3BSC690072R1 | 8 channels, common return, 0(4)-20 mA, 12 bits, load: 725 ohms short-circuit-proof |
| AO895 | 3BSC690087R1 | 8 channels, common return, 4-20 mA, 12 bits, load: 725 ohms short-circuit-proof, HART pass-through. |
| Redundant modules | ||
| DI840 | 3BSE020836R1 | 16 channels, common return, 24 V d.c., current sink, extended diagnostics, time-tagging, current limited sensor supply |
| DO840 | 3BSE020838R1 | 16 channels, common return, 24 V d.c., max. 0,5 A, transistor, current source, short-circuit-proof, extended diagnostics |
| AI843 | 3BSE028925R1 | TC input, 8 channels + ref. junction. TC types: B, C, E, J, K, L, N, R, S, T, U, -30…75 mV, 16 bits, extended diagnostics. |
| AI845 | 3BSE023675R1 | 8 channels, 12 bits, 0(4)-20 mA 0(1)-5 V, extended diagnostics, HART pass-through, current limited transmitter supply, single ended |
| Redundant modules - HI Integrity | ||
| AI880A | 3BSE039293R1 | 8 channels with HART, 0(4)-20 mA, 12 bits, SIL3, current limited transmitter power. |
| DI880 | 3BSE028586R1 | 16 channels, 24V d.c, SIL3, current limited sensor power, time-tagging. |
| DO880 | 3BSE028602R1 | 16 channel, 24 V d.c., 0.5 A, SIL3, Current sourcing, current limiting |
| S800L modules | ||
| DI801 | 3BSE020508R1 | 16 channels, 1 group, 24 V d.c., current sink. |
| DI802 | 3BSE022360R1 | 8 channels, 110 V d.c., 150 V a.c. |
| DI803 | 3BSE022362R1 | 8 channels, 220 V d.c., 230 V a.c |
| DO801 | 3BSE020510R1 | 16 channels, common return, 24 V, max 0.5 A d.c., transistor, current source, short-circuit-proof |
| DO802 | 3BSE022364R1 | 8 channels, 5-250 V, max 2 A a.c./d.c., relay (N.O.). |
| AI801 | 3BSE020512R1 | 8 channels, single-ended, 0(4)-20 mA, 12 bits. |
| AO801 | 3BSE020514R1 | 8 channels, common return, 0(4)-20 mA, 12 bits, load: less than 750 ohms |
| Accessories | ||
| TU805K01 | 3BSE035990R1 | For DI801 & DO801. With field power distribution screw terminals. For two or three wire connection. |
| Module Termination Units | |||||
| TU805K01 | 3BSE035990R1 | TU810V1 | 3BSE013230R1 | TU811V1 | 3BSE013231R1 |
| TU812V1 | 3BSE013232R1 | TU813 | 3BSE036714R1 | TU814V1 | 3BSE013233R1 |
| TU818 | 3BSE069209R1 | TU819 | 3BSE068891R1 | TU830V1 | 3BSE013234R1 |
| TU831V1 | 3BSE013235R1 | TU833 | 3BSE038726R1 | TU835V1 | 3BSE013236R1 |
| TU836V1 | 3BSE013237R1 | TU837V1 | 3BSE013238R1 | TU838 | 3BSE008572R1 |
| TU839 | 3BSE046966R1 | TU842 | 3BSE020850R1 | TU843 | 3BSE021443R1 |
| TU844 | 3BSE021445R1 | TU845 | 3BSE021447R1 | TU850 | 3BSE050930R1 |
| TU851 | 3BSE068782R1 | TU852 | 3BSE069964R1 | TU854 | 3BSE069966R1 |
| TU890 | 3BSC690075R1 | TU891 | 3BSC840157R1 | TY801K01 | 3BSE023607R1 |
| TY804K01 | 3BSE033670R1 | TY805K01 | 3BSE081160R1 | TY820K01 | 3BSE056980R1 |
Our product packaging aims to provide functionality and aesthetic appeal. We understand the importance of creating a positive first impression and ensuring the safe delivery of products to customers. The following are the main features of our packaging:
Durable materials: We use high-quality materials that are sturdy and durable, and will not be damaged during transportation. This ensures that our products reach our customers in good condition.
Safe packaging: Our packaging design focuses on a safe outer shell. We use protective layers and liners to prevent any damage to the product caused by external impact or rough handling.
Clear labels: Our packaging includes clear and detailed labels. They provide necessary detailed information, such as product name, quantity, instructions for use, and any necessary warning labels. This helps customers easily identify and understand the product.
Attractive design: We believe that packaging should have visual appeal. Our design team has created a striking modern packaging design that reflects the essence of our brand. This helps our products stand out on store shelves and leave a positive impression.
Shanghai Zhongcheng Fengyuan Industrial Technology Co., Ltd. is an engineering company with a global network of engineering centers, providing high-performance and cost-effective services to global customers. We have established partnerships with most world-renowned brands and can provide components and equipment for the oil and gas, industrial, chemical, and energy industries.
The company's industrial control brand covers major global manufacturers, including but not limited to: Allen Bradley, Siemens, IFM, Beckhoff, Yaskawa, Pepperl+Fuchs, Sick, etc. The products include PLC/DCS modules, touch screens, drive inverters, industrial power supplies, I/O systems, industrial communication, low-voltage control equipment, low-voltage distribution equipment, medium voltage spare parts, protective relays, etc. We have rich industry experience, professional services, and good protective packaging.
We cooperate with various official express delivery companies to export to various parts of the world, such as South Asia, Europe, North America, South America, the Middle East, and Africa. Reducing customer costs helps to create more benefits for each of our customers
Zhongcheng Fengyuan has won the trust of a large number of customers. Our belief is to help our customer factories achieve digitization, intelligence, automation, and create maximum benefits for our customers. Looking forward to working with you!
1. Question: How about the warranty?
Answer: All products we provide come with a 12 month warranty period
2. Question: What about transportation?
Answer: They are in stock and can be shipped immediately. We can arrange DHL at competitive prices The transportation of FedEx, UPS, TNT, EMS, and of course, customers can also use their own freight forwarders.
3. Question: Why did you purchase from us?
Answer: We have a team of qualified sales personnel who are always ready to meet customer needs with high-quality products.
4. Question: Are prices from other suppliers higher than yours?
Answer: Creating maximum benefits for customers is our belief. If you have a better price, please let us know. We will make every effort to meet your price and provide support for you.
5: What payment method do you accept?
Answer: Telegraphic transfer (bank transfer), Western Union transfer, credit card PayPal, Letter of credit, Alipay, cash, trusteeship, etc.
){kind=link}