Suppliers with verified business licenses
ABBS Ability™ System 800xA®
System 800xA is not only a DCS (Distributed Control System) it's also an Electrical Control System, a Safety system and a collaboration enabler with the capacity to improve engineering efficiency, operator performance and asset utilization.
S800 I/O is a comprehensive, distributed and modular process I/O system that communicates with parent controllers over industry-standard fieldbus technology and therefore can be used with a wide range of process controllers from ABBS and other vendors.
The AI801 Analog Input Module has 8 channels for current input. The current input is able to handle a short circuit to the transmitter supply at least 30 V d.c without damage.
Current limiting is performed with a PTC resistor. The input resistance of the current input is 250 ohm, PTC included.
| General info | |
| Article number | 3BSE020512R1 |
| Type | Analog Input |
| Signal specification | 0...20 mA, 4...20 mA |
| Number of channels | 8 |
| Signal type | Unipolar single ended |
| Mechanics | S800L |
| Detailed data | |
| Resolution | 12 bit |
| Input impedance | 230 - 275 kΩ (current input incl PTC) |
| Isolation | Groupwise isolated from ground |
| Under/over range | 0% / +15% |
| Error | Max 0,1% |
| Temperature drift | Typ. 50 ppm/°C, Max. 80 ppm/°C |
| Input filter (rise time 0-90%) | 180 ms |
| Update cycle time | 1 ms |
| Maximum field cable length | 600 meters (656 yards) |
| Max input voltage (non destructive) | 30 V d.c. |
| NMRR, 50Hz, 60Hz | > 40dB |
| Rated insulation voltage | 50 V |
| Dielectric test voltage | 500 V a.c. |
| Power dissipation | 1.1 W |
| Current consumption +5 V Modulebus | 70 mA |
| Current consumption +24 V Modulebus | 0 |
| Current consumption +24 V external | 30 mA |
| Supported wire size | Solid: 0.05-2.5 mm², 30-12 AWG Stranded: 0.05-1.5 mm², 30-12 AWG Recommended torque: 0.5-0.6 Nm Stripping length 6-7.5mm, 0.24-0.30 inch |
| Diagnostics | |
| Front LED's | S(tatus) (run or fault) |
| Status indication of supervision | Module Error, Module Warning, Channel error |
| Dimensions | |
| Width | 86.1 mm |
| Depth | 58.5 mm |
| Height | 110 mm |
| Weight | 0.24 kg |
S800 I/O Modules
S800 I/O is a comprehensive and modular process I/O system that communicates with parent controllers either direct connected using the Modulebus or over industry-standard field buses. Thanks to its broad connectivity it fits a wide range of process controllers from ABBS and others.
| Digital input modules | |
| DI810 | 16 channels, 2 groups of 8 channels, 24 V d.c., current sink. |
| DI811 | 16 channels, 2 groups of 8 channels, 48 V d.c., current sink. |
| DI814 | 16 channels, 2 groups of 8 channels, 24 V d.c., current source. |
| DI818 | 32 channels, 2 groups of 16 channels, 24 V d.c., current sink. |
| DI820 | 8 channels, separate returns, 110 V d.c., 120 V a.c. |
| DI821 | 8 channels, separate returns, 220 V d.c., 230 V a.c. |
| DI825 | With time tagging, 8 channels, separate returns, 125 V d.c. |
| DI828 | 16 channels, separate returns, 110 V d.c., 120 V a.c / d.c. |
| DI830 | With time tagging. 16 channels, 2 groups of 8 channels, 24 V d.c., current sink. Resolution: < 0.5 ms. |
| DI831 | With time tagging. 16 channels, 2 groups of 8 channels, 48 V d.c., current sink. Resolution: < 0.5 ms. |
| Pulse input module | |
| DP820 | 2 channels, separate returns, 0.25 Hz - 1.5 MHz, signal voltage: 5 / 12 V d.c. |
| DP840 | 8 channels, extended diagnostics, wire-fault detection, current limited sensor supply, 0.5-20 kHz, 12/24 V d.c or NAMUR, common return. |
| Digital output modules | |
| DO810 | 16 channels, 2 groups of 8 channels, 24 V d.c., max 0.5 A d.c., transistor, current source, short-circuit-proof |
| DO814 | 16 channels, 2 groups of 8 channels, 24 V d.c., max 0.5 A, transistor, current sink, short-circuit-proof. |
| DO815 | 8 channels, 2 groups of 4 channels, 24 V d.c., max 2 A, transistor, current source, short-circuit-proof, wire-fault detection. |
| DO818 | 32 channels, 2 groups of 16 channels, 24 V, max 0.5 A d.c., transistor, current source, short-circuit-proof |
| DO820 | 8 channels, separate returns, 5-250 V, max 3 A a.c./d.c., relay (N.O.). |
| DO821 | 8 channels, separate returns, 5-250 V, max 3 A a.c./d.c., relay (N.C.). |
| DO828 | 16 channels, separate returns, 5-250V a.c. / 5-125V d.c. max 2A a.c./d.c., relay (N.O.). |
| Analog input modules | |
| AI810 | 8 channels, single-ended, 0(4)-20 mA, 0(2)-10 V, 12 bits. |
| AI815 | 8 channels with HART. 0(4)..20 mA, 0(1)..5 V, 12 bit, single ended, current limited transmitter supply. |
| AI820 | Differential inputs, 4 channels, 0(1)-5 V, ±0(2)-10 V, ±0(4)-20 mA, 14 bits + sign. |
| AI825 | Individually galvanically isolated channels, 4 channels, ±0(2)-10 V, ±0(4)- 20 mA, 14 bits + sign. |
| AI830A | RTD inputs, 8 channels, Pt100, Ni100, Ni120, Cu10, resistor 0-400 ohms, 14 bits, 3-wire. |
| AI835A | TC inputs, 8 channels, (7+ ref. junction), separate returns. TC types B, C, D, E, J, K, L, N, R, S, T, U, - 30…75 mV, 15 bits |
| Analog output modules | |
| AO810V2 | 8 channels, common return, 0(4)-20 mA, 14 bits, load: 850 ohms (short-circuit-proof). |
| AO815 | 8 channels with HART. 4..20 mA, 12 bit, load: 750 ohms, common return, short-circuit-proof. |
| AO820 | 4 channels, individually galvanically isolated, separate returns, measuring range: ±0(2)-10 V, ±0(4)-20 mA, resolution: 12 bits + sign, load: 500 ohms (current) / 5 kohms (voltage), short-circuit-proof. |
| Intrinsic-safety modules | |
| DI890 | 8 channels, separate returns, proximity sensors (NAMUR) or voltage-free contact., current sink, wire-fault detection |
| DO890 | 4 channels, separate returns, load 150-5000 ohms, 11 V @ 40 mA, current source, wire-fault detection, short circuit-proof. |
| AI890 | 8 channels, single-ended, 0(4)-20 mA, 12 bits, transmitter power supply. |
| AI893 | 8 channels, TC: 7 + ref. junction, sep. returns. TC types B, C, E, J, K, L, N, R, S, T, U, -10…80 mV. RTD: Pt50-1000, Ni100-500, Cu10-100, resistor 0-4000 W, 3-wire. 15 bits + sign. |
| AI895 | 8 channels, single-ended, 4-20 mA, 12 bits, transmitter power supply, HART pass-through. |
| AO890 | 8 channels, common return, 0(4)-20 mA, 12 bits, load: 725 ohms short-circuit-proof |
| AO895 | 8 channels, common return, 4-20 mA, 12 bits, load: 725 ohms short-circuit-proof, HART pass-through. |
| Redundant modules | |
| DI840 | 16 channels, common return, 24 V d.c., current sink, extended diagnostics, time-tagging, current limited sensor supply |
| DP840 | 8 channels, common return, 0.5-20 kHz, 12/24 V d.c or NAMUR, extended diagnostics, wire-fault detection |
| DO840 | 16 channels, common return, 24 V d.c., max. 0,5 A, transistor, current source, short-circuit-proof, extended diagnostics |
| AI843 | TC input, 8 channels + ref. junction. TC types: B, C, E, J, K, L, N, R, S, T, U, -30…75 mV, 16 bits, extended diagnostics. |
| AI845 | 8 channels, 12 bits, 0(4)-20 mA 0(1)-5 V, extended diagnostics, HART pass-through, current limited transmitter supply, single ended |
| Redundant modules - HI Integrity | |
| AI880A | 8 channels with HART, 0(4)-20 mA, 12 bits, SIL3, current limited transmitter power. |
| DI880 | 16 channels, 24V d.c, SIL3, current limited sensor power, time-tagging. |
| DO880 | 16 channel, 24 V d.c., 0.5 A, SIL3, Current sourcing, current limiting |
| S800L modules | |
| DI801 | 16 channels, 1 group, 24 V d.c., current sink. |
| DI802 | 8 channels, 110 V d.c., 150 V a.c. |
| DI803 | 8 channels, 220 V d.c., 230 V a.c |
| DO801 | 16 channels, common return, 24 V, max 0.5 A d.c., transistor, current source, short-circuit-proof |
| DO802 | 8 channels, 5-250 V, max 2 A a.c./d.c., relay (N.O.). |
| AI801 | 8 channels, single-ended, 0(4)-20 mA, 12 bits. |
| AO801 | 8 channels, common return, 0(4)-20 mA, 12 bits, load: less than 750 ohms |
| Accessories | |
| TU805K01 | For DI801 & DO801. With field power distribution screw terminals. For two or three wire connection. |
Our product packaging aims to provide functionality and aesthetic appeal. We understand the importance of creating a positive first impression and ensuring the safe delivery of products to customers. The following are the main features of our packaging:
Durable materials: We use high-quality materials that are sturdy and durable, and will not be damaged during transportation. This ensures that our products reach our customers in good condition.
Safe packaging: Our packaging design focuses on a safe outer shell. We use protective layers and liners to prevent any damage to the product caused by external impact or rough handling.
Clear labels: Our packaging includes clear and detailed labels. They provide necessary detailed information, such as product name, quantity, instructions for use, and any necessary warning labels. This helps customers easily identify and understand the product.
Attractive design: We believe that packaging should have visual appeal. Our design team has created a striking modern packaging design that reflects the essence of our brand. This helps our products stand out on store shelves and leave a positive impression.
Shanghai Zhongcheng Fengyuan Industrial Technology Co., Ltd. is an engineering company with a global network of engineering centers, providing high-performance and cost-effective services to global customers. We have established partnerships with most world-renowned brands and can provide components and equipment for the oil and gas, industrial, chemical, and energy industries.
The company's industrial control brand covers major global manufacturers, including but not limited to: Allen Bradley, Siemens, IFM, Beckhoff, Yaskawa, Pepperl+Fuchs, Sick, etc. The products include PLC/DCS modules, touch screens, drive inverters, industrial power supplies, I/O systems, industrial communication, low-voltage control equipment, low-voltage distribution equipment, medium voltage spare parts, protective relays, etc. We have rich industry experience, professional services, and good protective packaging.
We cooperate with various official express delivery companies to export to various parts of the world, such as South Asia, Europe, North America, South America, the Middle East, and Africa. Reducing customer costs helps to create more benefits for each of our customers
Zhongcheng Fengyuan has won the trust of a large number of customers. Our belief is to help our customer factories achieve digitization, intelligence, automation, and create maximum benefits for our customers. Looking forward to working with you!
1. Question: How about the warranty?
Answer: All products we provide come with a 12 month warranty period
2. Question: What about transportation?
Answer: They are in stock and can be shipped immediately. We can arrange DHL at competitive prices The transportation of FedEx, UPS, TNT, EMS, and of course, customers can also use their own freight forwarders.
3. Question: Why did you purchase from us?
Answer: We have a team of qualified sales personnel who are always ready to meet customer needs with high-quality products.
4. Question: Are prices from other suppliers higher than yours?
Answer: Creating maximum benefits for customers is our belief. If you have a better price, please let us know. We will make every effort to meet your price and provide support for you.
5: What payment method do you accept?
Answer: Telegraphic transfer (bank transfer), Western Union transfer, credit card PayPal, Letter of credit, Alipay, cash, trusteeship, etc.
Suppliers with verified business licenses
){kind=link}
){kind=link}