| Task: | Adjust |
|---|---|
| Structure: | Combination |
| Mathematical Model: | Linear |
Suppliers with verified business licenses
Product Description:
EL2xxx | EtherCAT Terminals, digital output
The EtherCAT Terminals from the EL2xxx, ES2xxx, ELM2xxx, EM2xx and ELX2xxx series are intended for the processing of digital/binary signals. Unless otherwise stated, the high level corresponds to the supply voltage in the positive switching logic, the low level corresponds to ground. With the ground-switching logic, it is reversed. Different supply voltages are available for both types of logic. 1-, 2-, 3- and 4-wire connection techniques enable the use of EtherCAT Terminals in almost all applications without further wiring.
Advantages:
Areas of application:
Ex i, outputs
The ELX2xxx EtherCAT Terminal series allows the direct connection of an intrinsically safe actuator from potentially explosive atmospheres of zones 0/20 and 1/21.
TwinSAFE, outputs
The EL29xx EtherCAT Terminal series switches actuators or the potential supply fail-safe. The safety-relevant data are exchanged via FSoE with a TwinSAFE Logic-capable component.
EL2904 | EtherCAT Terminal, 4-channel digital output, 24 V DC, 0.5 A, TwinSAFE
The EL2904 TwinSAFE component is a digital output terminal with four channels. It switches 24 V DC actuators with up to 0.5 A per channel and has four fail-safe outputs. The outputs are controlled by a TwinSAFE Logic-capable component via FSoE. The component automatically switches off if it detects an error (fail-stop).
The EL2904 has safety parameters to specifically adapt the functionality to the respective safety requirements. For example, a current measurement at the outputs and a test of the outputs can be configured in order to be able to detect cross-circuits among other things and to react appropriately.
Special features:
| Technical data | EL2904 |
|---|---|
| Connection technology | 1-/2-wire |
| Specification | output of output signals |
| Number of outputs | 4 |
| Max. output current | 0.5 A (per channel), min. 20 mA (with active current measurement) |
| Protocol | TwinSAFE/Safety over EtherCAT |
| Fault response time | ≤ watchdog time (parameterizable) |
| Current consumption power contacts | load-dependent |
| Current consumption E-bus | typ. 221 mA |
| Installation position | horizontal |
| Safety standard | DIN EN ISO 13849-1:2008 (Cat. 4, PL e) and EN 61508:2010 (SIL 3) |
| Weight | approx. 100 g |
| Protection rating | IP20 |
| Housing data | EL-24-2x8pin |
|---|---|
| Design form | compact terminal housing with signal LEDs |
| Material | polycarbonate |
| Dimensions (W x H x D) | 24 mm x 100 mm x 68 mm |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Side by side mounting by means of | double slot and key connection |
| Marking | labeling of the BZxxx series |
| Wiring | solid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver |
| Connection cross-section | s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² |
| Connection cross-section AWG | s*: AWG28…14, st*: AWG28…14, f*: AWG26…16 |
| Stripping length | 8…9 mm |
| Current load power contacts | Imax: 10 A |
EL2xxx | Digital output |
|||||
| 1-channel | 2-channel | 4-channel | 8-channel | 16-channel | |
| Signal | |||||
| 5 V DC | EL2124 Imax = ±20 mA |
||||
| 12 V DC | EL2024-0010 Imax = 2.0 A |
||||
| 24 V DC Imax = 0.5 A |
EL2002 4-wire |
EL2004 2-wire |
EL2008 1-wire |
EL2809 Imax = 0.5 A |
|
| EL2409 New Preferred type 1-wire |
|||||
| EL2014 with diagnostics |
EL2068 Preferred type with channel diagnostics |
EL2819 with diagnostics |
|||
| EL2869 Preferred type with channel diagnostics |
|||||
| EL2808 8 x 0 V |
EM2042 D-sub connection |
||||
| EL2084 ground switching |
EL2088 ground switching |
EL2889 ground switching |
|||
| EL1859 type 3, 8 inputs, 8 outputs, Imax = 0.5 A |
|||||
| EL1852 type 3, 8 inputs, 8 outputs, Imax = 0.5 A, flat-ribbon cable |
|||||
| EL2878-0005 flat-ribbon cable, with diagnostics |
EL2872 flat-ribbon cable |
||||
| EL2872-0010 flat-ribbon cable, ground switching |
|||||
| 24 V DC Imax = 2.0 A |
EL2022 4-wire |
EL2024 2-wire |
EL2828 Imax = 2.0 A |
EL1819 type 3 |
|
| EL2032 with diagnostics |
EL2034 with diagnostics |
EL2838 with channel diagnostics |
EL1819 type 3 |
||
| EL2044 with extended diagnostics |
|||||
| 24 V DC Imax = 4,0 A/8,0 A |
EL2042 2 x 4.0 A/1 x 8.0 A |
||||
| 24 V DC XFC: TON/TOFF 1 µs |
EL1259 8 inputs, 8 outputs, multi-timestamping, Imax = 0.5 A |
||||
| EL2202 push-pull output |
|||||
| EL2202-0100 push-pull outputs, DC preset |
|||||
| 24 V DC XFC: T(on)/T(off) 1 µs |
EL2212 overexcitation, multi-timestamping | ||||
| EL2252 Preferred type timestamp |
EL2258 multi-timestamping |
||||
| EL2262 oversampling |
|||||
| 24 V DC EX i |
ELX2002 24 V DC, 45 mA, Ex i |
ELX2008 24 V DC, 30 mA, Ex i |
|||
| ELX2792 Imax = 0.5 A AC/1 A DC, change-over contact |
|||||
| 24 V DC Safe output |
EL2911 TwinSAFE Logic, 4 safe inputs, 1 safe output |
EL2912 TwinSAFE Logic, 2 safe outputs |
EL2904 TwinSAFE, 4 safe outputs |
||
| 30 V AC/48 V DC solid-state relay Imax = 2.0 A |
EL2784 Imax = 2.0 A |
EL2788 Imax = 2.0 A |
|||
| EL2794 potential-free |
EL2798 potential-free |
||||
| Relay (up to 250 V AC) |
EL2602 Imax = 5.0 A, make contact, power contacts |
||||
| EL2602-0010 Imax = 5.0 A, make contact, power contacts, contact-protecting switching |
|||||
| EL2612 Imax = 2.0 A, change-over, no power contacts |
|||||
| EL2622 Imax = 5.0 A, make contact, no power contacts |
EL2624 Imax = 2.0 A, make contact |
||||
| EL2622-0010 Imax = 5.0 A, make contact, no power contacts, contact-protecting switching |
|||||
| EL2634 Imax = 4.0 A, make contact, 250 V AC/30 V DC, no power contacts |
|||||
| EL2642 Imax = 1.0 A, change-over, no power contacts, reed relays |
|||||
| EL2652 Imax = 1.0 A, change-over, no power contacts |
|||||
| Triac (12…230 V AC) |
EL2712 Imax = 0.5 A, power contacts |
||||
| EL2722 Imax = 1.0 A, mutually locked outputs |
|||||
| PWM | EL2502 push-pull output, separate frequency can be set for each channel |
||||
| EL2502-0005 plastic optical fiber, separate frequency can be set for each channel |
|||||
| EL2502-0010 push-pull output, separate frequency can be set for each channel, timestamp |
|||||
| EL2535 24 V DC, Imax = ±50 mA, ±1 A, ±2 A |
|||||
| EL2535-0002 24 V DC, Imax = ±2 A |
|||||
| EL2535-0005 24 V DC, Imax = 0…5 A |
|||||
| EL2535-0050 24 V DC, Imax = ±50 mA |
|||||
| EL2535-0100 24 V DC, Imax = ±100 mA |
|||||
| EL2535-0103 48 V DC, Imax = 3.5 A |
|||||
| Frequency output | EL2521 1-channel AB, 0…500 kHz, RS422 |
EL2522 Preferred type 2-channel AB, 1-channel ABC, 0…4 MHz |
|||
| EL2521-0024 RS422, 24 V DC, externally powered |
|||||
| EL2521-0025 RS422, 24 V DC, externally powered, ground switching |
|||||
| EL2521-0124 RS422/24 V DC, capture/compare in-/output |
|||||
| LED control | EL2564 5…48 V DC, 4 A, RGBW, common anode |
||||
| EL2564-0010 8…48 V DC, 3 A, RGBW, common cathode |
|||||
| EL2574 pixel LED, 2048 individually addressable LEDs |
|||||
| Current control LED control |
EL2595 48 V DC, 300…700 mA, current control |
||||
| EL2596 24 V DC, 3 A, pulse > 25 µs, current control |
|||||
| EL2596-0010 48 V DC, 3 A, pulse > 25 µs, current control |
|||||
| Multiplexer | ELM2742-0000 2 x multiplexer, 1 x 4 solid-state relays |
ELM2744-0000 4 x multiplexer, 1 x 4 solid-state relays |
|||
| ELM2642-0000 2 x multiplexer, 1 x 4 reed relays |
ELM2644-0000 4 x multiplexer, 1 x 4 reed relays |
||||
Our product packaging aims to provide functionality and aesthetic appeal. We understand the importance of creating a positive first impression and ensuring the safe delivery of products to customers. The following are the main features of our packaging:
Durable materials: We use high-quality materials that are sturdy and durable, and will not be damaged during transportation. This ensures that our products reach our customers in good condition.
Safe packaging: Our packaging design focuses on a safe outer shell. We use protective layers and liners to prevent any damage to the product caused by external impact or rough handling.
Clear labels: Our packaging includes clear and detailed labels. They provide necessary detailed information, such as product name, quantity, instructions for use, and any necessary warning labels. This helps customers easily identify and understand the product.
Attractive design: We believe that packaging should have visual appeal. Our design team has created a striking modern packaging design that reflects the essence of our brand. This helps our products stand out on store shelves and leave a positive impression.
Shanghai Zhongcheng Fengyuan Industrial Technology Co., Ltd. is an engineering company with a global network of engineering centers, providing high-performance and cost-effective services to global customers. We have established partnerships with most world-renowned brands and can provide components and equipment for the oil and gas, industrial, chemical, and energy industries.
The company's industrial control brand covers major global manufacturers, including but not limited to: Allen Bradley, Siemens, IFM, Beckhoff, Yaskawa, Pepperl+Fuchs, Sick, etc. The products include PLC/DCS modules, touch screens, drive inverters, industrial power supplies, I/O systems, industrial communication, low-voltage control equipment, low-voltage distribution equipment, medium voltage spare parts, protective relays, etc. We have rich industry experience, professional services, and good protective packaging.
We cooperate with various official express delivery companies to export to various parts of the world, such as South Asia, Europe, North America, South America, the Middle East, and Africa. Reducing customer costs helps to create more benefits for each of our customers
Zhongcheng Fengyuan has won the trust of a large number of customers. Our belief is to help our customer factories achieve digitization, intelligence, automation, and create maximum benefits for our customers. Looking forward to working with you!
1. Question: How about the warranty?
Answer: All products we provide come with a 12 month warranty period
2. Question: What about transportation?
Answer: They are in stock and can be shipped immediately. We can arrange DHL at competitive prices The transportation of FedEx, UPS, TNT, EMS, and of course, customers can also use their own freight forwarders.
3. Question: Why did you purchase from us?
Answer: We have a team of qualified sales personnel who are always ready to meet customer needs with high-quality products.
4. Question: Are prices from other suppliers higher than yours?
Answer: Creating maximum benefits for customers is our belief. If you have a better price, please let us know. We will make every effort to meet your price and provide support for you.
5: What payment method do you accept?
Answer: Telegraphic transfer (bank transfer), Western Union transfer, credit card PayPal, Letter of credit, Alipay, cash, trusteeship, etc.
){kind=link}